Food & Beverage Hose
LLDPE Food Grade Tubing
Tuesday, 21 August 2012 18:49
  • Flexible general purpose Linear-Low Density Polyethylene tubing manufactured from premium-grade low taste and odor materials that comply with FDA and NSF-51 regulations.
  • Vent tubing applications for soft drink fountain machines for retail and commercial dispensing
  • Low pressure water lines (cold water only)
  • Drain and drip lines
  • Low pressure Food product distribution and dispensing o Condiments, food powders, liquid toppings
  • Industrial applications such as light vacuum, conduit, air and water transfer
Last Updated on Tuesday, 21 August 2012 19:08
 
PEB -PE Beverage Hose
Monday, 27 September 2010 20:50
  • Flexible Polyester-Reinforced Polyethylene beverage hose manufactured from premium-grade low taste and odor materials that comply with FDA and NSF-51 regulations. Applications:
  • Soft drink fountain machines for retail and commercial dispensing
  • Other beverage dispensing to include but not limited to the following
  • Coffee and coffee related products, fruit juice, frozen drinks, ice tea,
  • Fruit juice, ice tea, coffee and coffee related product dip
  • Water service (potable) both carbonated and non-carbonated
  • Dairy product dispensing machines
  • Milk, frozen dairy products, hot cheese, cream and imitation milk products
  • Food product distribution and dispensing
  • Condiments, food powders, liquid toppings
  • Draught beer, wine and liquor distribution and dispensing systems
Last Updated on Monday, 21 October 2013 21:54
 
PEB Extreme UV Stabilized PE Beverage Hose
Tuesday, 21 August 2012 19:17
  • PEB Extreme UV Stabilized PE Beverage Hose specially formulated for superior UV resistance to microbial growth in outdoor or direct sunlight installation.
  • Hose is made from premium grade FDA and NSF-51 listed materials.
  • The combination of the EVA cover and the Polyethylene tube material have been carefully selected for low taste and odor properties, superior flexibility, clarity and high environmental stress cracking resistance.
  • Remote indoor or outdoor connections to the various equipment listed below
  • Soft drink fountain machines for retail and commercial dispensing
  • Water service (potable) both carbonated and non-carbonated
  • Dairy product dispensing machines
  • Food product distribution and dispensing
  • Draught beer, wine and liquor distribution and dispensing systems
Last Updated on Tuesday, 21 August 2012 19:38
 
Marine/RV Hose
Thursday, 22 March 2007 15:12
Image





  • Marine/RV Hose for use in Recreational Vehicle Pressurized
    Cold Water Systems
  • Water contact surfaces are made from NSF listed materials, conforms to IAPMO Standard TS-25,
  • Water contact materials contain no substances designated as hazardous
    under California Proposition 65
  • When coupled properly, hose will pass IAPMO proof test requirement of
    300 PSI at 73 F for 48 hours
  • Lightweight with superior flexibility
Last Updated on Wednesday, 20 June 2012 14:29
 
PW 61 Potable Hose
Tuesday, 24 January 2006 14:10

Image

  • NSF-61 Certified Hose drinking water system components. (certification link)
  • Constructed of PVC materials sanctioned for food contact use under CFR title 21, parts 170-199.
  • Material compounds contain no substances designated as hazardous under California Proposition 65.
  • Non-Marking
  • Potable water hose
  • White Tube & Clear Cover
  • Ozone Resistant
  • Light-weight
  • When coupled properly, 1/4" - 1/2" sizes will conform to high=temp extreme test requirements as defined be ASME A112.18., Section 4.3
Last Updated on Monday, 21 October 2013 21:57
 
PW 61 w/tracer Potable Hose
Tuesday, 24 January 2006 14:21

Image

  • NSF-61 Certified Hose made with NSF approved materials for drinking water system components. (certification link)
  • Constructed of PVC materials sanctioned for food contact use under CFR title 21, parts 170-199.
  • Material compounds contain no substances designated as hazardous under California Proposition 65.
  • Non-Marking
  • Potable water hose
  • White Tube & Clear Cover with red (RD) or blue (BL) tracer yarn for color-coding.
  • Ozone Resistant
  • Light-weight
  • When coupled properly, 1/4" - 1/2" sizes will conform to high=temp extreme test requirements as defined be ASME A112.18.6, Section 4.3
Last Updated on Monday, 21 October 2013 21:57
 
PW Extreme Bacteria Resistant Hose
Tuesday, 24 January 2006 14:40

Image

  • Bacteria resistant liner will not support microbiological growth.
  • Made from NSF-61 listed PVC and specially formulated in compliance with applicable FDA regulations.
  • Non-Marking
  • Solid white cover
  • Light-weight
Last Updated on Monday, 21 October 2013 21:58
 
<< Start < Prev 1 2 Next > End >>

Page 1 of 2